ECT Bobbin Probes
Differential / absolute bobbin probes for heat-exchanger and condenser tubes in non-ferromagnet...
Eddy Current Testing
Tube inspection line
Probes & Calibration
Eddy current, RFT, NFT and MFL probes for all major instruments, with matching calibration tubes and reference blocks.
Probes compatible with all major equipment. Customized on demand.
26 products
Encircling Probes
External encircling coils for inspection of tubes, bars and wires from the outside.
Eddy Current Testing
MFL Probes
Magnetic flux leakage tube probes for pitting detection in ferromagnetic tubes.
Magnetic Flux Leakage
NFT Probes
Near field testing probes for finned carbon steel tubes such as air coolers.
Eddy Current Testing
Probe Centering Heads / Floats
Replaceable centering devices that keep tube probes centred and reduce wear.
Eddy Current TestingRemote Field Eddy Current Testing
RFT Probes
Remote field testing probes for carbon steel and other ferromagnetic tubes.
Remote Field Eddy Current Testing
ECT Calibration Tube
Reference tube with machined defects (ASME-style) for ECT bobbin probe calibration.
Eddy Current Testing
IRIS Calibration Tube
Reference tube with machined steps and defects for IRIS ultrasonic calibration.
Ultrasonic Testing
MFL Calibration Tube
Reference tube with pits and wall-loss defects for MFL probe calibration.
Magnetic Flux Leakage
NFT Calibration Tube
Finned reference tube with ID defects for NFT calibration.
Eddy Current Testing
RFT Calibration Tube
Ferromagnetic reference tube with machined wall-loss defects for RFT calibration.
Remote Field Eddy Current Testing
ASME Basic Calibration Block (Side-Drilled Holes)
ASME Section V basic calibration block with side-drilled holes, made to the specified thickness...
Ultrasonic Testing
Conductivity Reference Standards
Reference standards of known conductivity for eddy current conductivity measurement and sorting...
Eddy Current Testing
DAC / TCG Reference Block
Block with reflectors at several depths for constructing DAC and TCG curves.
Ultrasonic Testing
ECT Surface Reference Block (EDM Notches)
Reference block with EDM notches of known depth for surface probe calibration.
Eddy Current Testing
IIW (V1) Calibration Block
IIW type 1 block for range, index point, beam angle and resolution checks.
Ultrasonic Testing
PAUT Calibration Block (SDH / ACG)
Phased array calibration block for velocity, wedge delay, sensitivity (ACG) and TCG.
Ultrasonic Testing
TOFD Reference Block
Reference block with notches and holes for TOFD set-up and verification.
Ultrasonic Testing
V2 (Miniature) Calibration Block
Compact V2 block for field calibration of angle and straight beam probes.
Ultrasonic Testing
BNC Cables
BNC probe and signal cables for eddy current instruments and probes.
Eddy Current Testing
Probe Extension Cables
Extension cables for reaching long tube runs and remote tube sheets.
Eddy Current TestingMagnetic Flux LeakageRemote Field Eddy Current Testing
TUD Cables
Probe cables for tube inspection probes, in standard and custom lengths.
Eddy Current TestingRemote Field Eddy Current Testing
Custom Probe Fixtures & Holders
Part-specific fixtures and probe holders for repeatable eddy current sorting and testing.
Eddy Current Testing
Encircling Coil Sorting Probe
Through-coil probe for grade, hardness and heat-treatment sorting, sized to the part.
Eddy Current Testing
Surface Probes
Pencil, pancake and spot surface probes for crack detection and point sorting.
Eddy Current Testing
Not sure which probe?Enter the tube material, OD and wall: get the part number, fill factor, frequencies and the matching calibration tube.
Open probe finder
Special tube, alloy or instrument?
Send us the tube drawing, material certificate or your instrument model: we design probes to suit and make matching calibration tubes.