Ultrasonic weld inspection commonly termed as UTFD/ UT is widely used in Oil & Gas Field, Power Generation and many other industries to inspect quality ...

Although time-of-flight diffraction (TOFD) can be used for a variety of applications, its primary use is rapid weld testing of circumferential and axial weld seams, ...

Eddy Current Sorting is widely used in the Aerospace & Automobile, and in other manufacturing and service environments that require inspection and segregation/ sorting of materials ...

Condenser performance is one of the largest factors affecting thermal power generation efficiency, profitability and emission levels. Air ingress causing a 10 mmHg increase above ...

With more than a decade of experience in Leak testing of valves, we have come up with the technology to conduct leak tests on valves ...

Leaks in pressurized equipment are usually referred to as Fugitive emissions. These are emissions of gases or vapours due to leaks and other unintended or ...

Leaks in Turbines and Condensers are a serious efficiency concern in Power Plants. This can be controlled by  Helium leak detection for steam turbines and condensers ...

The internal rotary inspection system (IRIS) is an ultrasonic non-destructive testing (NDT) technique used to inspect pipes and tubes.

How it Works

Because IRIS is ...

Remote field testing (RFT) is an electromagnetic method of non-destructive testing whose main application is finding defects in steel pipes and tubes. RFT may also ...

Magnetic flux leakage (MFL) is a magnetic method of nondestructive testing that is used to detect corrosion and pitting in steel structures, most commonly pipelines ...

Phased array ultrasonics (PA) is an advanced method of ultrasonic testing that has applications in medical imaging and industrial nondestructive testing. Common applications are to non ...

Penetrant Test (PT) is a sensitive method of detecting minute discontinuities that are open to the surface of the weld.

Penetrant test is particularly useful on nonmagnetic materials, ...

The ID oxide scale is produced by oxidation in the reheater and superheater. The scale build up occurs when the tubes have experienced high temperatures ...

Ultrasonic Thickness Gauging is a method of performing non-destructive investigation to check material properties such as thickness using ultrasonic waves. Vibrant NDT Services makes use ...

Pipelines are the lifeline of all industries. Safe transportation of fluid the pipeline is supposed to carry is a serious concern for all industries regardless ...

Cause & Effect

Corrosion, a common and serious problem faced by industries; particularly industries like petrochemical and power sectors that use or generate Hydrocarbons, Steam ...

NDT is a basic need for Industries like Power Plants & Refineries to ensure safety and reliability. Components like Heat Exchangers & Condensers need to ...

Forgings are used where High Strength material component is required such as Generator Shafts. These forged materials when manufactured are subjected to Heat and Compression ...

Steel rods and Pipes are inspected for surface and sub-surface Cracks and Defects before machining to reduce production loss. Whether manual, automated, or phased array, ...

Ultrasonic Inspection is a very useful and versatile NDT method. It is sensitive to both surface and subsurface discontinuities. It has other uses, such as ...

Eddy Current Non Destructive Testing is a reliable, quick and inexpensive way to carry out preventative maintenance and ensure safety. Eddy current is good for detecting ...

Leak Testing Services, a Non-Destructive Testing (NDT) that aims detection and characterization of Leaks in a system. Leak Testing (LT) is a Leak Testing NDT ...